工业炉燃烧系统应用技术探讨

燃烧及其控制技术是各种火焰炉技术核心，强调高水平燃烧系统应对燃烧全过程进行控制，着重对燃烧系统点火、火焰监测、空燃比比例调节、燃烧过程各参数监控、炉温自动控制等各个方面内容进行了讨论介绍，最后用某天然气加热炉燃烧系统原理图及应用效果进行实例说明。     

Plasma Sprayed Hydroxyapatite Coatings with Nano-hydroxyapatite Prepared by Ultrasonic Precipitation Process

Nano-particle hydroxyapatite （ HA ） was prepared with a novel ultrasonic precipitation process and the as-prepared nanopowder was used to produce hydroxyapatite （ HA ） coatings on titanium substrate via plasma spraying. The phase and the microstructare of the coating were characterized by X- ray diffraction （XRD） and scanning electron microscopy （SEM）. Results showed that spherical particles could be prepared by ultrasonic precipitation process; and a corresponding dense HA coating with molten surface and low-porosity cross-section structure was acquired. During the plasma spraying process, new phases of Ca3 （ PO4 ）2 and Ca2 P2O7 were generated. After heat-treating at 800℃ for 1 h, the contents of Ca3 （ PO4 ）2 and Ca2 P2O7 decreased while HA content increased. Tensile adhesion tests showed that the plasma sprayed coating prepared with the spherical nanoparticles exhibited high tensile bond strength.     

Inductively coupled plasma etching of InGaP, AllnP, and AlGaP in Cl2 and BCl3 chemistries

Dry etching of InGaP, AlInP, and AlGaP in inductively coupled plasmas (ICP) is reported as a function of plasma chemistry (BCl₃ or Cl₂, with additives of Ar, N₂, or H₂), source power, radio frequency chuck power, and pressure. Smooth anisotropic pattern transfer at peak etch rates of 1000–2000Å·min^?1 is obtained at low DC self-biases (?100V dc) and pressures (2 mTorr). The etch mechanism is characterized by a trade-off between supplying sufficient active chloride species to the surface to produce a strong chemical enhancement of the etch rate, and the efficient removal of the chlorinated etch products before a thick selvedge layer is formed. Cl₂ produces smooth surfaces over a wider range of conditions than does BCl₃.     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

火烧油层技术在庙5块低渗透稠油油藏中的应用

方法在物理模拟的基础上，利用数值模拟及油藏工程方法，对影响火烧油层的技术参数进行了优选研究，并对影响火驱成败的油藏地质参数、注气参数进行了分析。目的寻找适合庙５块低渗透稠油油藏的开采方法。结果提出了庙５块火驱的最佳开采方式、点火参数及注气参数；庙５块火驱生产后，平均单井日产液由０１ｔ上升到５６ｔ，平均单井日产油由０１ｔ上升到３５ｔ，生产２６ｄ后由于压风机供风不足被迫停止火驱注气；从数模结果看：火驱最终采收率可达３９８％。结论火烧油层是一种潜力很大的稠油开采方法，但其物理、化学反应机理复杂，火烧前缘难以控制；庙５块火驱初期虽然见到了一定的生产效果，但没有取得经济效益     

脉冲等子体软X射线探测系统

研制了一种脉冲重复频率为１０Ｈｚ的激光等离子体软Ｘ射线源；设计并建立了以掠入射恒偏单色仪为基础的脉冲等离子体软Ｘ射线辐射测试系统。光源实验使用能量１０００ｍＪ（波长０．５３μｍ）的激光脉冲，聚焦在不同的金属靶上，使之离子化。这种高温等离子体产生的辐射包含了波长０．４～２０ｎｍ的软Ｘ光连续谱和迭加在其上的线谱。靶材有Ｍｇ、Ａｌ、Ｔｉ、Ｆｅ、Ｃｕ、Ｚｎ、Ｓｎ、Ｐｂ和Ｂｉ。得到了不同原子序数的靶材辐射的光谱分布特性。     

激光诱导等离子体中电子密度随时间演化的实验研究

通过测定激光等离子体中镁原子和离子谱线Ｓｔａｒｋ展宽的时间演化特性．得到了激光诱导等离子体中电子密度的时间演化行为及其机理。     

氯酸钾－木炭系与铅丹－硅系引火药头对铁脚线桥脚锈蚀的影响

文中分析和探讨了氯酸钾－木炭系引火药头的锈蚀问题，进而提出了铅丹－硅系引火药头，并经贮存实验表明后者对于克服前者的锈蚀问题有明显的作用。     

高功率激光焊接光致等离子体的检测

系统地归纳了高功率激光焊接过程中光致等离子体的声、光、电、热等四种特征信号，综述了国外在等离子体信号检测方面的试验方法及研究进展，分析了未来的发展趋势     

Plasma Discharge Initiation of Explosives in Rock Blasting Application： A Case Study

A plasma discharge initiation system for the explosive volumetric combustion charge was designed, investigated and developed for practical application. Laboratory scale experiments were carried out before conducting the large scale field tests. The resultant explosions gave rise to less noise, insignificant seismic vibrations and good specific explosive consumption for rock blasting. Importantly, the technique was found to be safe and environmentally friendly.